Product Introduction
MT-5 series iron oxyhydroxide desulfurizer is made of modified iron oxyhydroxide as the main active component, which is modified during the production process of iron oxyhydroxide to improve the desulfurization precision and sulfur capacity of the product. High-quality molding additives are also added in the molding process of MT-5 to improve the porosity and specific surface area of the product, and the porosity reaches more than 45%. The product has the advantages of high sulfur capacity, high desulfurization precision, and long replacement cycle. It can be widely used in the purification of sulfur-containing gases for industries of petroleum refining, natural gas, oilfield associated gas, coking, fertilizer, steel mills, biogas, shale gas, pharmaceuticals, etc. Secondly, the product is also suitable for fine desulfurization of gas in the conversion section of coal chemical industry, and it can be used as a substitute for zinc oxide, which has a higher price.
Main Technical Indexes
1.Sulfur capacity: ≥50%
2.Color and appearance: yellow-brown columnar particles
3.Specification(mm): φ3~5×3~15
4.Strength(N/cm): ≥55
5.Bulk density(kg/L): 0.75~0.85
Using Conditions
1.Applicable temperature: 10-80°C
2.Airspeed: 500-1500h-1
3.Empty tower linear speed: 0.10-0.30m/s
4.Pressure:normal pressure~8MPa
5.Humidity: 70% of the saturated vapor is optimal, but it is forbidden to bring water in to the bed
6.The height-diameter ratio of the bed: ≥3