China Factory for Waste Gas Treatment – Fine SO2 Removal Dry Desulfurizer from Flue Gas for Coal Industry – Mingshuo

MY type flue gas desulfurizer

MY type flue gas desulfurizer is a product that can be used for the removal of SO2 in flue gas from steel furnaces, coking furnaces, fertilizers, incinerators, kilns, boilers, generators, etc.

Performance characteristics: low bed resistance, good strength and high sulfur capacity. High removal rate and wide use temperature zone.

Items Parameters
Appearance Off-white strips
Main ingredients Ca-based compounds, special additives, forming agents
Specification (mm) Φ8×(3-20)
Bulk density (g/mL) 0.75-0.85
Strength (N/cm) ≥100
Removal rate (%) ≥90.0
Working sulfur capacity (Wt%) ≥25.0

SO2 desulfurizer

Reaction Principle:

The SO2 in the feed gas reacts with active components such as calcium hydroxide and magnesium oxide in the desulfurizer to form corresponding solid salts to achieve the purpose of desulfurization;

The main chemical reaction equation: Ca(OH))2+SO2+½O2 =CaSO4+H2O

Operating Conditions

1. Airspeed: ≤2000h-1
2. Temperature: 40~450ºC
3. Pressure: 0.1~3.0MPa

Process Description

SO2脱硫

The flue gas directly enters the desulfurization tower. When the flue gas passes through the dry desulfurizer, the heavy metals such as sulfur dioxide, mercury, lead, copper, arsenic, and HF, HCl and other pollutants in the flue gas are removed, and the purified flue gas is cleaned The flue is collected and discharged through the chimney.

Process Advantages

(1) High desulfurization precision;
(2) It has the characteristics of small investment, short work flow, simple operation and low operating cost.
(3) No water and no secondary pollution.

 


  • China Factory for Waste Gas Treatment – Fine SO2 Removal Dry Desulfurizer from Flue Gas for Coal Industry – Mingshuo Related Video: